Premium Rear Tipper - Tipper Kits Australia

Go to content

Main menu:

Premium Rear Tipper

Tip Tray Conversion Kits ->


1500Kg Ute Kit - $2750
- 1500Kg Capacity*
- Suits Trays 1850mm - 2600mm long

1000Kg Short Ute Kit - $2750
- Designed for Dual Cabs
- 1000Kg Capacity*
- Suits Trays 1500mm - 1850mm Long

2000Kg Ute Kit - $3250
- 2000Kg Capacity*
- Suits Trays 1850mm - 2600mm long

Options for above Ute Kits
Wireless Remote Control - $POA
Additional Function Valve - $POA

Need a tray?
Check out our Tradie Pack


*Tipping capacity is including the weight of the tray and with the load evenly distributed.

Not sure what you need?
No problem, give us a call 7 days on our Tech Support Hotline  - 0407 581 620

Email a link to this page to a friend
Requires email to be set up on your computer.

Convert your ute into a tipper with this DIY Kit!

From $2750 including GST

The kit consists of a sub frame including hydraulics that mounts under an existing tray and tips an evenly distributed one tonne load to approximately 50 degrees in around 15 seconds and because the system is operated by a double acting electro-hydraulic circuit it comes down fast without increasing the tray height in most installations.

It has a host of built in safety features including over load protection while lifting
, hose burst protection and a unique automatic locking system that mechanically locks the tray in the down position to prevent the tray from tipping in the event of an accident. This lock also eliminates that annoying rattle that most tip trays display. Safety chocks are provided that lock the tray in the raised position to enable work to be carried out under the tray safely.

The kit is designed to be fitted by anyone with basic tools and metal working knowledge and comes with comprehensive fitting instructions and a technical support line should fitting assistance be required.

Standard Specifications
- Approximately 50 degrees of tip angle
- Suits most tray top uteS
- 12V Horizontal Mount Power Unit
- Steel Reservoir

Standard Features
- Uses your existing tray
- Auto Tray Lock secures tray when lowered
- Hose burst protection

- Safety pins
- Manual Override for Electric Valve
- Built in factory pre-set Pressure Relief Valve

Kit Includes
- Assembled Hinged Subframe
- Auto Tray Lock (Fitted to Subframe)
- Safety Pins
- Double Acting Tipper Cylinder (Fitted to Subframe)
- Hose Burst Valve
- Hydraulic Power Unit
- Hydraulic Hose and Fittings
- Universal Tray Mount Brackets and Hardware
- Universal Power Unit Mount Bracket and Hardware
- Main Power Cable
- Assorted Cable Lugs and Heatshrink
- Main Power Fuse
- Main Isolator Switch
- Universal Isolator Switch Mount Bracket
- 2 Button Hand Piece with Cable
- Assorted Electrical Terminals
- Assorted Hardware
- Assorted Cable Ties

Back to content | Back to main menu